Serving the Baltimore area  ·  (443) 726-1475  ·  Open Mon-Sun 7am-7pm
📞 (443) 726-1475 Free Quote

Metal Roofing in Catonsville, MD (21228) · Local Professionals

Baltimore Metal Roofing · Fast response in Catonsville and the Baltimore area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Catonsville's stone and brick Cape Cods and colonials sit under some of the biggest oaks and tulip poplars in Baltimore County, and that combination of old roofs and heavy tree cover keeps our phones busy. The 1920s bungalows off Frederick Road and the post-war cottages near the Beltway were built with steep pitches and small dormers, and their roofs take a beating from limbs, leaves, and freeze-thaw cycles every winter.

We're Baltimore Metal Roofing, and we work Catonsville (21228) and the surrounding neighborhoods every week. From the mansard fronts near the Catonsville Junction to the slate-look roofs along Paradise Avenue, we know how these houses are put together and what it takes to keep water out for good. When a nor'easter rolls up the Patapsco and your porch roof starts dripping, you want a crew that can get there fast and fix it right.

Metal Roofing in Catonsville (21228)

Catonsville is hilly, heavily wooded, and full of older homes with steep roofs and tight lots. The ground here is a mix of clay and rock, so drainage matters, and many properties have mature trees close enough to drop limbs on the roof during summer storms. We see a lot of 5V crimp on old porch roofs, standing seam on dormers, and stone-coated steel in slate profiles on the bigger colonials. The freeze-thaw cycle in winter is hard on seams and flashing, and the humid summers grow algae and moss on north-facing slopes. Ice damming at the eaves is common on the higher elevations near the Community College, and we often find failed fasteners and separated seams after a heavy snow or ice event. Our team has been working these roofs for years, and we know what fails first and how to fix it without cutting corners.

We serve Catonsville and the surrounding Baltimore area, from the historic districts near the Junction to the newer subdivisions off Rolling Road. Whether it's a small leak repair or a full standing seam installation, we bring the same approach: assess the roof honestly, explain your options, and do the work right.

Our services in Catonsville

How a Job Works in Catonsville

Step 1: You call us at (443) 726-1475 or send a message, and we schedule a free on-site assessment. We'll walk the roof, check the flashing, seams, and fasteners, and look at the gutters and drainage. You'll get a written estimate with clear pricing and options, no pressure and no surprises.

Step 2: Once you approve, we pull the permits with Baltimore County (or Baltimore City if you're inside the line) and schedule the work. On tight Catonsville lots with big trees, we plan access carefully, and if your home is in a historic district or HOA, we help with the paperwork and color choices. We protect your landscaping and keep the site secure.

Step 3: After the job, we clean up thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you're satisfied and that every detail is finished before we leave.

Pricing in Catonsville depends on the size and pitch of your roof, access, and the condition of the existing structure. For a typical Catonsville Cape Cod or colonial, metal roof installation starts around $8 per square foot, standing seam from $10, and replacement from $9. If you're retrofitting over shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. We also handle gutters from $9 per linear foot and flashing repairs from $600. Every roof is different, so call us at (443) 726-1475 for a free estimate and a straight answer on what your project will cost.

My Catonsville Cape Cod has huge oak trees dropping limbs on the roof. Can metal roofing handle that better than shingles?
Yes, metal roofing handles falling limbs much better than asphalt shingles. Shingles can crack or tear, while metal panels usually dent or scratch but stay watertight. We often recommend standing seam or stone-coated steel for heavily wooded lots in 21228, and we can add snow guards to keep ice and debris from sliding off in big chunks.
A storm just knocked a branch onto my roof in Catonsville. How fast can you get out for an emergency repair?
We prioritize storm and wind damage calls in Catonsville and the surrounding area. Call us at (443) 726-1475, and we'll schedule a free inspection as soon as possible, often the same day or next. We can tarp or patch active leaks quickly and then give you a full repair estimate.
What does a metal roof repair typically cost in Catonsville?
Most metal roof repairs in Catonsville start around $450 for leak fixes and small flashing repairs. Screw replacement and re-fastening starts at $750. The final price depends on the extent of the damage, roof access, and whether we need to match existing panels. We give you a firm quote before any work begins.
Do I need a permit for a metal roof replacement in Catonsville, and how does the historic district affect it?
Yes, Baltimore County generally requires a permit for a full roof replacement, and if your home is in a historic district like parts of Catonsville, you may also need design review approval. We handle the permit paperwork and can guide you through the historic or HOA approval process. Rules can change, so we always confirm with the local building department before starting.
My neighbor's tree hangs over my roof in Catonsville. What are my rights, and can you help with HOA approval for a metal roof?
Property line and tree issues are civil matters, but we can trim back branches that overhang your roof during installation if they're on your side. For HOA approval, we provide product specs, color samples, and installation details to help you get approval. We've worked with many HOAs in the Catonsville area and can help streamline the process.
Are you fully insured for roofing work in Catonsville?
Yes, Baltimore Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Catonsville's climate?
In Catonsville, we recommend an annual inspection, especially after winter, to check for loose fasteners, debris buildup in valleys and gutters, and any signs of ice damming. Keeping gutters clear and trimming overhanging branches helps a lot. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Baltimore

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Baltimore

All your work handled by qualified professionals in Baltimore

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Baltimore

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Baltimore · Response within 24h · No commitment · ☎ (443) 726-1475

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Baltimore ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm