Serving the Baltimore area  ·  (443) 726-1475  ·  Open Mon-Sun 7am-7pm
📞 (443) 726-1475 Free Quote

Metal Roofing in Glen Burnie, MD (21061) · Local Professionals

Baltimore Metal Roofing · Fast response in Glen Burnie and the Baltimore area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+292Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Glen Burnie is a town of practical, hardworking homes, many of them ranches and Cape Cods built between the 1950s and 1970s, with shingle roofs that have seen a lot of weather off the Chesapeake Bay. If you live near Ritchie Highway or in one of the older neighborhoods off Baltimore Annapolis Boulevard, you know the routine: humid summers, nor'easters, and the occasional ice storm that finds every weak spot in a roof.

That's why homeowners in Glen Burnie (21061) call Baltimore Metal Roofing. We know the housing stock here, from the brick ranchers near Glen Burnie High School to the water-oriented communities off Marley Neck, and we specialize in metal roof installation, repair, and replacement that stands up to bay-area conditions.

Metal Roofing in Glen Burnie (21061)

Glen Burnie sits on the western shore of the Chesapeake Bay, where the terrain is mostly flat to gently rolling and the soil can be sandy or clay-heavy depending on where you are. That matters for drainage and for how we handle runoff from metal roofs. Many properties here are on generous lots with mature trees, oaks and maples that drop leaves and limbs, and that shade can keep roofs damp and prone to algae and moss. The older ranches and Cape Cods often have low-slope porch roofs and dormers, which are prime candidates for a metal roof over shingles retrofit or for standing seam on the main roof. We also see a lot of 5V crimp on older porches and outbuildings, and we can match or replace those panels. The salt-tinged air off the bay and the freeze-thaw cycles in winter stress flashing and fasteners, so we pay close attention to those details on every job. Our team has worked on homes throughout Glen Burnie and the surrounding Baltimore area, from Ferndale to Pasadena, and we understand the local building department's permit requirements and inspection timelines.

We bring that experience to every Glen Burnie project, whether it's a simple screw replacement or a full standing seam installation.

Our services in Glen Burnie

How a Job Works in Glen Burnie

Step 1: You call us at (443) 726-1475 or fill out our online form. We'll schedule a free on-site assessment at your Glen Burnie property. We'll inspect your existing roof, take measurements, and talk with you about what you want: a repair, a replacement, or a metal roof over your current shingles. We'll also check for any signs of damage from storms or leaks.

Step 2: Once you approve the estimate, we'll pull the necessary permits from the local building department (we handle the paperwork) and schedule the work. On tight lots or in neighborhoods with HOA rules, we'll coordinate access and make sure any design or color choices meet the community standards. Our crew arrives on time, protects your landscaping, and works efficiently to get your new metal roof installed or your repair done right.

Step 3: After the work is complete, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk the job with you to make sure you're satisfied, and we don't leave until you are. We leave your property clean and your roof ready for whatever Glen Burnie weather brings.

Pricing for metal roofing in Glen Burnie depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. We also offer metal roof coating and painting from $2.50 per square foot, and gutters for metal roofs from $9 per linear foot. Every roof is different, so we provide a free estimate after inspecting your property. Call (443) 726-1475 to schedule yours.

My 1960s ranch near Point Pleasant has original shingles. Can you install a metal roof over them?
Yes, in many cases we can do a metal roof over shingles retrofit, provided your existing roof has only one layer of shingles and the decking is in good shape. We'll inspect your roof to confirm it meets code requirements and that the structure can handle the added weight. This is often a cost-effective option for Glen Burnie homes.
A storm just blew some panels loose on my roof off Ritchie Highway. How fast can you respond?
We offer free inspections for storm and wind damage and can usually schedule an assessment within a day or two, depending on demand. For active leaks or dangerous conditions, call us immediately at (443) 726-1475, and we'll prioritize your call. We'll secure the area and provide a repair estimate.
What's the typical cost for a metal roof repair in Glen Burnie?
Most metal roof repairs start around $450, but the final price depends on the extent of the damage, the type of metal, and access to the roof. For example, a simple leak repair might be on the lower end, while replacing multiple panels or fixing flashing around a chimney could cost more. We give you a firm quote after a free inspection.
Do I need a permit for a metal roof replacement in Glen Burnie?
Yes, Anne Arundel County generally requires a permit for a full roof replacement or re-roof. The exact requirements and fees can vary, so we always verify with the local building department before starting work. We handle the permit application and inspections as part of our service.
My HOA has rules about roof colors. Can you help with approval?
We're familiar with many HOAs in the Glen Burnie area and can provide color samples and documentation to help you get approval. We'll coordinate with your HOA to ensure the metal roof you choose meets their guidelines. If there are property line concerns, we can also review setbacks and suggest solutions.
Are you fully insured for work in Glen Burnie?
Yes, Baltimore Metal Roofing is fully insured, carrying both general liability and workers' compensation insurance.
How often should I have my metal roof inspected in Glen Burnie?
We recommend an inspection every two to three years, especially after major storms. Glen Burnie's humid summers and winter freeze-thaw cycles can loosen fasteners and stress seals. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Baltimore

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Baltimore

All your work handled by qualified professionals in Baltimore

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

292+ Verified Client Reviews in Baltimore

⭐⭐⭐⭐⭐ 4.9/5 · 292 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Baltimore · Response within 24h · No commitment · ☎ (443) 726-1475

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Baltimore ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm